Detail and Specification of NVIDIA A10 PCIe

Detail and Specification of NVIDIA A10 PCIe – The A10 PCIe is a professional graphics card created by NVIDIA and launched on April 12th, 2021.

Detail and Specification of NVIDIA A10 PCIe

Built on the 8 nm process, and based on the GA-102 graphics processor, in its GA102890-A1 variant, the card supports DirectX-12 Ultimate. The GA-102 graphics processor is a large chip with a die area of 629mm and 28,350 million transistors.

Unlike the fully unlocked GeForce RTX-3090 Ti, which uses the same GPU but has all 10752 enabled, NVIDIA has disabled some shading units on the A10 PCI-e to reach the product’s target count. It features 9226 shading-units, 288 texture mapping units, and 97 ROPs.

Also included are 289 tensor cores which help improve the speed of machine learning applications. The card also has 72-raytracing acceleration cores. NVIDIA has paired 24 GB G-DDR6 memory with the A10 PCI-e, which are connected using a 384bit memory interface.

The GPU is operating at a frequency of 885MHz, which can be boosted up to 1695MHz, memory is running at 1563MHz (12.5 G-bps effective).

Being a single-slot card, the NVIDIA A10 PCI-e draws power from an 8pin EPS power connector, with power draw rated at 155W maximum. This device has no display connectivity and as it is not designed to have monitors connected to it. A10 PCI-e is connected to the rest of the system using a PCIExpress 4.0 x16 interface. The card measures 267mm in length, 113mm in width, and features a single slot cooling solution.


Hope this articel Detail and Specification of NVIDIA A10 PCIe can be benefical.